Door Handles & Door Edge Guards Preparation & Installation

  • DOOR HANDLE
    • Prep and clean painted surface.
    • Place template in center of door handle.
    • Set/Squeegee a “+” pattern.
    • Remove remaining solution.
    • Wick film edges. 
    • Heat seal film edges. 
    DOOR EDGE
    • Prep and clean painted surface.
    • Place template with 1/4 inch notch on the outside of the door. 
    • Using other hand as a guide set/Squeegee in place. 
    • Firmly pull door open. 
    • Roll edge guard around door edge toward inside of door. 
    • Heat film edges. 

Reach Out To Us