Hood Installation

  • Spray painted surface with demoter.
  • Place template liner out upside down at top of the hood.
  • Separate the liner from the paint protection film template and discard the liner. 
  • Place template adhesive side down in the center of the leading edge of hood. 
  • Set/Squeegee center of the hood. 
  • Stretch to first anchor point and squeegee 3-4 inches on the leading edge of the hood. 
  • Remove remaining demoter solution by squeegeeing back toward windshield.
  • Wick film edges. 
  • Heat seal film edges.  

Reach Out To Us