DigiCut App

System Requirements

Two different questions. Can this computer run DigiCut? What should you use for a good DigiCut experience?

Hardware

Minimum and recommended

Minimum hardware is supported hardware. It can run DigiCut and complete normal work. Recommended hardware is what DigiCut is designed and optimized for.

Supported

Minimum

For running DigiCut

Systems that meet these specs can run DigiCut and complete normal cutting and design work. Near the minimum, the workspace is smaller and complex templates may feel slower.

1366 × 768display

  • Processor64-bit dual-core
  • Memory4 GB RAM
  • StorageHard drive with enough free space
  • InternetBroadband connection
  • Operating systemWindows 10 Home or Pro or later, or macOS 11.7.10 or later

Designed for this

Recommended

For the best DigiCut experience

More workspace, quicker response, and better performance on larger or more demanding projects. This is the hardware class DigiCut is intended to feel best on.

1920 × 1080+display

  • ProcessorModern 4+ core Intel, AMD, or Apple silicon
  • Memory8–16 GB RAM
  • StorageSSD
  • InternetBroadband connection
  • Operating systemCurrent Windows 11 or current macOS
Plotter Compatibility

Plotter Compatibility

Check whether your plotter works with DigiCut App. Expand a brand to see its models. Call 1-800-452-7311 if you need help confirming a model.

These brands and models work with DigiCut App.

These brands and models will not work with DigiCut App.

APD-Anagraph1 model
  • PD4800
DGI1 model
  • Omega Series OM-100
EcoCut1 model
  • EcoCut
GCC5 models
  • Expert II 52
  • Jaguar IV(4)
  • Jaguar V (5)
  • Puma3
  • RXII
Graphtec8 models
  • CE5000
  • CE6000
  • CE7000
  • FC7000
  • FC8000
  • FC8600
  • FC9000
  • PRO FC5100
HP2 models
  • Latex 54 Basic Cutting Solution (Ethernet Only)
  • Latex 64 Plus Cutting Solution (Ethernet Only)
HPN Vinylsystems1 model
  • Specialist
Ioline1 model
  • Smartrac 130
Muse1 model
  • M60
Mutoh4 models
  • Kona SCL 1650
  • Ultima SC-1400
  • ValueCut
  • ValueCut 2 (Shows up as a Jaguar in software)
Plotter Depot3 models
  • Workhorse
  • Workhorse 2
  • Workhorse 3
Roland8 models
  • CAMM1 GR2-640
  • CAMM1 GS series
  • CX 300
  • CX 400
  • CX 500
  • GX 300
  • GX 400
  • GX 500
Secabo1 model
  • T120
Seiki1 model
  • 1350
SK1 model
  • SK-M720
Summa3 models
  • D140
  • Summa S3 T150 - Ethernet Only
  • Summa S2 - Ethernet Only
US Cutter8 models
  • LazerPoint 3
  • MH Series
  • MHMK2 Series
  • SC
  • SC2
  • Titan
  • Titan 2
  • Titan 3
Vevor7 models
  • AB-1350 (53in Plotter)
  • B-1350 (53in Plotter)
  • B-870 (34in Plotter)
  • D-1350 (53in Plotter)
  • KI-1350 (53in Plotter)
  • KI-870 (34in Plotter)
  • SK-1350 (53in Plotter)
Vicut1 model
  • RC1600
Vinyl Express2 models
  • Q42 Series
  • Q54 Series
Graphtec1 model
  • Plus 4100 series
Gunner1 model
  • GC180
Mimaki4 models
  • CG-AR Series
  • CG130 FXII - Uses Mimaki port
  • CG130 SRIII Series - Uses Mimaki port
  • CG160 FXII - Uses Mimaki port
Mutoh1 model
  • Valuecut 1300
Procut1 model
  • Creation CR1300
Roland8 models
  • CAMM1 GR640
  • SOLJET Pro XC-540
  • SOLJET Pro XR-640
  • TruVIS VG2
  • TruVIS VG3
  • VersaCamm SP540I
  • VersaCamm VM540
  • VersaCAMM VS-540
Teneth1 model
  • 1660L
Vevor1 model
  • SK1350 (Does Not work with Mac)

Need help confirming a model?

Contact Support

Our bilingual team can confirm plotter compatibility and help you get DigiCut App running.

1-800-452-7311